Cable Installation
For water- and dust protected cabling of electrical components

Our Cable Installation

As a system provider for marine electrics, KARL DOSE naturally also offers a comprehensive range of cable glands, reductions, extensions, locknuts and thick-walled tube-cable glands for shipping and industry. The products are made of high-quality brass, polyamide or steel and are available in protection classes IP 56 and IP 68. They are suitable for both indoor and outdoor use and are produced in accordance with DIN-, EN- and VG-standards, among others. The variety makes it easy for you to always find the right product for your requirements. On the following pages you will find all products related to cable installations.

TONGA Screw-in Type Cable Glands in several sizes

TONGA Screw-in Type Cable Glands in several sizes

Product variations: M16x1,5 to M105x2

Product versions: W (for unscreened cable) / Z (for screened cable)

Main material: Brass

Norm: DIN 89280

TONGA Screw-in Type Cable Glands with Other Connection Thread in several sizes

TONGA Screw-in Type Cable Glands with Other Connection Thread in several sizes

Product variations: M16x1,5 to M72x2

Versions: W (for unscreened cable) / Z (for screened cable) with larger or smaller external thread

Main material: Brass

Standards: Cable gland similar to DIN 89280, thread according to EN 50262

TONGA Cable Gland with PG-Type Connection Thread in several sizes

TONGA Cable Gland with PG-Type Connection Thread in several sizes

Product variations: M18x1,5 to M72x2

Product versions: W (for unscreened cable) / Z (for screened cable) with metric inner thread and PG outer thread

Main material: Brass

Standard: DIN 89280

HEBRIDEN Reduction-Type Cable Glands of Brass in several sizes

HEBRIDEN Reduction-Type Cable Glands of Brass in several sizes

Product variations: M18x1,5 to M72x2

Versions: W (for unscreened cable) / Z (for screened cable) with larger outer thread

Main material: Brass

HEBRIDEN Extension Cable Entry for Screwing-in in several sizes

HEBRIDEN Extension Cable Entry for Screwing-in in several sizes

Product variations: M24x1,5 to M72x2

Versions: W (for unscreened cable) / Z (for screened cable) with larger connection thread

Main material: Brass

  • IP68

BORNEO Cable Gland for Screwing (Ship Standard) in several sizes

BORNEO Cable Gland for Screwing (Ship Standard) in several sizes

Product variations: M16x1,5 to M72x2

Versions: W (for unscreened cable) / Z (for screened cable)

Main material: Brass

Special feature: With strain relief

Protection class: IP 68

  • IP68

BORNEO Cable Gland for Screwing (Industry Standard) in several sizes

BORNEO Cable Gland for Screwing (Industry Standard) in several sizes

Product variations: M16x1,5 to M63x1,5

Versions: W (for unscreened cable) / Z (for screened cable)

Main material: Brass

Special feature: With strain relief

Protection class: IP 68

SUMATRA Cable Glands Screw-in or Rivet Type of Fitting VG 88812 in several sizes

SUMATRA Cable Glands Screw-in or Rivet Type of Fitting VG 88812 in several sizes

Product variations: M16x1,5 to M72x2

Product versions: Optionally with srew-in or rivet type 

Main materials: Brass (earthing cones chromium-plated)

Standard: VG 88812

Earthing Cones VG in several sizes

Earthing Cones VG in several sizes

Product variations: M16x1,5 to M72x2

Main material: Brass, chromium plated

Standard: VG 88812

FIDSCHI Cable Glands in several sizes

FIDSCHI Cable Glands in several sizes

Product variations: M12x1,5 to M63x1,5 or PG 7 to PG 48

Main material: Brass, nickel plated

Special feature: With strain relief

Protection class: IP 68 – 5 bar

Standard: EN 50262

HONSHU Cable Glands in several sizes

HONSHU Cable Glands in several sizes

Product variations: M18x1,5 to M72x2

Main material: Brass, chromium plated

Special feature: Special production for electrical conductive walls

CALYPSO Rivet Type Cable Glands of Brass in several sizes

CALYPSO Rivet Type Cable Glands of Brass in several sizes

Product variations: M18x1,5/15 to M72x2/65

Versions: W (for unscreened cable) / Z (for screened cable)

Main material: Brass

Standard: DIN 89280

CALYPSO Rivet Type Cable Glands of Steel in several sizes

CALYPSO Rivet Type Cable Glands of Steel in several sizes

Product variations: M18x1,5/15 to M72x2/65

Versions: W (for unscreened cable) / Z (for screened cable)

Main material: Steel, galvanized (screw bush brass)

Standard: DIN 89280

LOFOTEN Cable Glands in several sizes

LOFOTEN Cable Glands in several sizes

Product variations: M12x1,5 to M63x1,5 or PG 7 to PG 48

Main material: Polyamide

Protection class: IP 68 –  bar

Standard: DIN EN 50262

LOFOTEN Flat Locknuts in several sizes

LOFOTEN Flat Locknuts in several sizes

Product variations: M12x1,5 to M63x1,5 or PG 7 to PG 48

Main material: Polyamide

Note: Suitable for LOFOTEN cable glands

LOFOTEN Blind Plugs and Membrane Nipples in several sizes

LOFOTEN Blind Plugs and Membrane Nipples in several sizes

Product variations: M12x1,5 to M63x1,5 or PG 7 to PG 48

Main material: Polyamide

Note: Suitable for LOFOTEN cable glands

CEDROS ASS-Thick-Walled Tube in several sizes

CEDROS ASS-Thick-Walled Tube in several sizes

Product variations: M24x1,5 or M30x2

Length: 50 to 1250mm

Main material: Steel, galvanized (ASS) or aluminium (ASSA)

Usage: For wall or deck bushings

Internal Parts Type of Fitting “W” in several sizes

Internal Parts Type of Fitting “W” in several sizes

Product variations: M16x1,5 to M105x2 for unscreened cables

Consisting of: 2 washers and 1 sealing ring

Main material: Brass (washers) and EPDM (rubber)

Standards: DIN 89347, DIN 89349

Internal Parts Type of Fitting “Z” in several sizes

Internal Parts Type of Fitting “Z” in several sizes

Product variations: M18x1,5 to M105x2 for screened cables

Consisting of: 1 washer, 1 sealing ring and 1 earthing cone

Main material: Brass (washer + earthing cone) and EPDM (rubber)

Standards: DIN 89347, DIN 89349, DIN 89345

Screw Bushes in several sizes

Screw Bushes in several sizes

Product variations long: M16x1,5 to M72x2

Product variations short: M18x1,5 to M72x2

Main material: Brass

Standard: DIN 89280

TONGA Flat Locknuts of Brass in several sizes

TONGA Flat Locknuts of Brass in several sizes

Product variations: M16x1,5 to M105x2

Product versions: Standard or EMV (flat claws locknuts for optimal vibration resistance)

Main material: Brass

Standard: DIN 89280 or similar to DIN 89280

TONGA Flat Locknuts of Brass, Nickel Plated in several sizes

TONGA Flat Locknuts of Brass, Nickel Plated in several sizes

Product variations: M12x1,5 to M63x1,5 or PG7 to PG48

Product versions: With metric- or PG-thread

Main material: Brass, nickel plated

Standards: DIN 46319 or respectively DIN 46320

HU Brass Srew-Plugs in several sizes

HU Brass Srew-Plugs in several sizes

Product variations: M16x1,5 to M72x2 or PG 7 to PG 48

Main material: M = Brass, PG = Brass, nickel plated

Usage: Closing of not required cable entries

Note: If required, order the appropriate connection thread sealing rings ADICHT M18-M72 as well.

Sealing Rings for Ext. Thread in several sizes

Sealing Rings for Ext. Thread in several sizes

Product versions: ADicht M18 - M72

Main material: Polyethylen

Usage: In addition to the HU screw plug

ERISEE Reduction with PG-thread (inside) and Metric-thread (outside) in several sizes

ERISEE Reduction with PG-thread (inside) and Metric-thread (outside) in several sizes

Product variations: PG 7 to PG 42 with large metric connection thread and small PG internal thread

Specific feature: Hexagonal and oil-resistant O-ring

Main material: Brass, nickel plated

ERISEE Reduction with PG thread (inside and outside) in several sizes

ERISEE Reduction with PG thread (inside and outside) in several sizes

Product variations: PG 7 to PG 42 with large PG connection thread and small PG internal thread

Special feature: Knurled

Main material: Brass, nickel plated

HURONSEE Enlargement with PG-thread (inside) and M-thread (outside) in several sizes

HURONSEE Enlargement with PG-thread (inside) and M-thread (outside) in several sizes

Product variations: PG 9 to PG 48 with larger PG inner thread

Special feature: Round

Main material: Brass, nickel plated

Standard: DIN 46320

HURONSEE Enlargement with PG-thread (inside and outside) in several sizes

HURONSEE Enlargement with PG-thread (inside and outside) in several sizes

Product version: PG 7 to PG 42 with larger PG inner thread

Special feature: Round

Main material: Brass, nickel plated

Standard: DIN 46320

GOTLAND Twin-Cable Glands in several sizes

GOTLAND Twin-Cable Glands in several sizes

Product variations: M24x1,5 (inner and outer thread) or M24x1,5 (inner thread) and PG16 (outer thread)

Main material: Brass

Special feature: For connection of two cables into one gland

GALATHEA Bulkhead Stuffing Glands or Bulkhead Flanges in several sizes

GALATHEA Bulkhead Stuffing Glands or Bulkhead Flanges in several sizes

Product variations bulkhead stuffing glands: For cable diameters from 9 to 62 mm

Product variations bulkhead flanges: With outer diameter from 31 to 20 mm

Main material: Brass

Screw-in Tools in several sizes

Screw-in Tools in several sizes

Product variations: M18x1,5 to M72x2

Main material: Steel

Special feature: Patended screw-in tools for damage free installation of cable glands

We are here for you!

Do you have questions about our products and services? We have the expertise to answer your questions and the solutions to meet your needs. Here you will find your right contact person:

Your contact persons at Karl dose